Equipment Rentals

Hire Latest technology equipment with or without an operator

Introducing

Equipment Rentals

GTR provides a comprehensive Instrumentation and Test Equipment rental service for customers throughout the UK. GTR’s range of our rental equipment covers all applications for commissioning of electrical substations. Test and measurement instrumentation are despatched to the desired location by courier. We offer the very best competitive prices for all equipment for short & long term hire periods.

Equipment rentals

GTR as a Commissioning Company and Installation company has first-hand experience and is acutely aware of the requirements of quality reliable state of the art equipment.

Various equipment to test Cables, Transformers, Motors , Protection relays , GTR has the equipment your project requires at lower than market rates with or without operators.

Equipment purchase is also available as GTR is the registered distributer for Kingsine Equipment in United Kingdom.

Available equipment:

  • OMCRON 256
  • OMICRON 356
  • KINGSINE K3036i
  • KINGSINE K3063i
  • OMICRON CT ANALYSER
  • KINGSINE CT ANALYSER
  • OMICRON CPC 100
  • OMICRON CB TESTER CIBANO 500
  • PROGRAMME PRIMARY SET 600A
  • PICO SCOPE
  • SMA PTE 300v
  • DC TRIP TESTER CBCT
  • OMICRON TESTRANO 600
  • OMICRON DIRANA
  • OMICRON FRANEO (SFRA)
  • BE10 DC source
  • DC Temporary Supplies for substations
Multi-phase test sets

MI-GTR-01

Omicron 256

Unit has Advanced Diff/Dist CMC 256 plus

Standing charge, with software and necessary accessories

MI-GTR-02/03 

Omicron 356

CMC 356: 6 Phase Current + 4 Phase Voltage Test Set

Standing charge, with software and necessary accessories

MI-GTR-04

Kingsine 6 Phase Injection

K3063 Kingsine with Advanced Software

Standing charge, with software and necessary accessories

MI-GTR-05

Kingsine 3 Phase Injection

Kingsine K3030Li

K30 Series Protection Relay Test Set 7 output channels, AC Output 3 30A/4 130V

MI-GTR-05

3 Phase Injection

SMA PTE 300v

Universal, portable, test system with three outputs to test three phase protection systems.

Single-phase test sets

SI-GTR-01

Secondary injection

Sverker 650 Programme

Standing charge, with software and necessary accessories

SI-GTR-02

ISA Injection Set

Phase Shift Ability

Standing charge, with software and necessary accessories

CT Analysers / PT Analysers

CT-GTR-01

Kingsine CT/PT Analyser

CT Analyser & PT Analyser

Standing charge, with software and necessary accessories FREE DEMO

CT-GTR-02&03

Omicron

CT Analyser

Standing charge, with software and necessary accessories

Primary Injection Test Sets

PI-GTR-01

Omicron CPC 100

Multifunctional Primary Test System

Standing charge, with software and necessary activities

PI-GTR-02/03/04

Programmer

600A Primary Injection

Standing charge, with leads and necessary accessories

PI-GTR-05/06

GTR Designed

1000A Primary Injection

6v and 12v for higher impedance circuits , with leads and necessary accessories

Circuit Breaker Test Equipment

CB-GTR-01

Omicron Cibano 500

Circuit breaker Tester

3-in-1 test system for medium- and high-voltage circuit breakers

CB-GTR-02

Omicron Transducer Pack TN3 addition to Cibano 500

Accessories pack for motion detection

With adaptor brackets for ABB / Siemens / GE(Alstom) to allow effective repetitive measurement

CB-GTR-03/04

ABB SACE

The SACE PR010/T

Unit is an instrument capable of performing the functions of testing, programming and reading parameters for the protection units equipping ABB SACE low-voltage circuit-breakers.

04 – New Electronic Tester version available

CB-GTR-05

Vanguard

CBCT DC Trip test unit

Variable voltage DC power supply designed to test substation circuit-breaker Open and Close coils. Maintains up to an 80A test current while maintaining 2% or better voltage regulation during the circuit breaker coil operation. (Reduced cost if hired with Pico Scope)

CB-GTR-06

Megger B10E

CBCT  DC TRIP TESTER

A variable DC voltage is needed to test a circuit breaker. Substation batteries should not be used since this entails considerable risk for testing personnel, testing equipment and also for the equipment being tested. The best way to ascertain whether or not solenoids and protective mechanisms are sluggish or set improperly is to perform a test at minimum tripping voltage. The minimum trip voltage test is described in a number of international and national standards such as IEC 62271-100, ANSI C37.09 etc. (Reduced cost if hired with Pico Scope)
 

Transformer  Test Equipment

TX-GTR-01

Omicron

TESTRANO 600 Transformer tester

Provides you with a convenient way of testing, to gain  a comprehensive insight into the condition of every part of your power transformer.

TX-GTR-02

Omicron

CP TD1  Tan/Delta

Upgrade option to expand your exisiting TESTRANO 600 or CPC100

to a power / dissipation factor test system

TX-GTR-03

Omicron

FRANEO 800 Sweep Frequency Response Analyzer

Standing Charge, with software and necessary accessories

TX-GTR-04

Omicron

Dirana FDS-PDC Dielectric Response Analyzer

Standing Charge, with software and necessary accessories

TX-GTR-05

PT100

Simulator tester

PT100 sensor boil up equipment available too

Miscellaneous  Test Equipment

MT-GTR-01

Picoscope 400 series (4 channel)

The ultimate USB oscilloscope.

High-end features such as serial decoding, mask limit testing and segmented memory. (Reduced cost if hired with Reduced Voltage Tester)

MT-GTR-02

Pico scope

Point on Wave Recorder 8 channels

The ultimate USB oscilloscope.
High-end features such as serial decoding, mask limit testing and segmented memory. Supplied with Antenuators and 5 x Clip on CT ‘s used for recording Point on Wave solutions Fluctuating onload recordings.

Please complete and we will get back to you ASAP

Equipment Rentals Enquiry Form

Quick Rental
close slider